How to submit your sample(s)
Please use the following specifications when sending your sample(s).
Water Sample(s)
-
-
-
- Do Not add preservative to sample.
- Submit a minimum of 1-liter in a tightly sealed plastic container (to have sample bottles shipped to you, please email us at orders@h2osystems.com )
- Fill completely before sealing to minimize entrapped air.
- Complete Profile requires 2 samples: 1 “casing sample” following 8-12 hours offline and
1 “aquifer sample” after 3-4 hours constant pumping. - Download a PDF of the Well Sample Data Sheet and mail it in with your sample(s).
-
-
Scale/Deposit Sample(s)
- For scale samples, submit 5 to 6 ounces in a sealed container or Ziploc style bag, labelled with the project or site name. If the sample is wet, please include water from the sample site to keep the sample moist.
- Download a PDF of the Scale/Deposit Sample Data Sheet
Filter Media Sample(s)
- For filter media, please collect approximately a minimum of 1 quart (or 4 cups) of media from both the surface and mid-point of the media bed. Include water from the filter in the sealed container and label the sample appropriately.
- Download a PDF of the Filter Media Sample Data Sheet
Please note you must submit a separate form for each sample you are sending.
New Customer? Download a new customer PDF form, complete it, and submit with any exemption forms.
Please read over our Technical Services Agreement prior to submitting the form.
Send samples to:
Water Systems Engineering, Inc.
Attn: Lab
3201 Labette Terrace
Ottawa, KS 66067
USA
Send via UPS or Fed-Ex ONLY
Overnight or 2nd day is acceptable
(scheduled to arrive Tuesday through Thursday)